Fits 1999-2004 Mustang with Stock Spindles
The Baer “Tracker” adjustable tie-rods feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8” heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated. The Trackers Tie Rods are vehicle specific, mounting to the OE inner tie rod and offer approximately .875” of adjustment at the spindle to help correct bump steer issues due to modified suspensions and/or poor OE design. Best of all these are made in the USA!
- Direct bolt on upgrade
- Black E-Coated for Rust Protection
- Fully adjustable
- Simple installation
- Tapered pin for NO spindle modifications
- Vehicle specific
Information:
Ships in 1 Box
Application Summary:
| Year |
Make/Model |
| 1994-2004 |
Ford Mustang |
| Attributes |
| Adjustable |
Yes |
| Adjusting Sleeve Included |
Yes |
| Adjustment Range |
0.875 |
| Applications |
1994-04 Mustang with stock spindles Note: if you have SN95 spindles on a 79-93 car, you will want to use the 79-93 trackers |
| Axle |
Front, Front |
| Boot Color |
N/A |
| Box Count |
1, 1 |
| Brand |
Baer Brakes |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Castle Nut Included |
No |
| Category |
Steering |
| Color |
Black |
| Cotter Pin Included |
No |
| Country of Origin (Primary) |
US |
| Dust Boot Included |
No |
| Emission Code |
6, 6 |
| End 1 Gender |
Female |
| End 2 Gender |
Female |
| Export Description |
Suspension Components, Suspension Components |
| Finish |
Black e-coated, Black e-coated |
| Grade Type |
Premium, Premium |
| Greasable |
Yes |
| Grease Fitting Included |
No |
| Harmonized Tariff Code (Schedule B) |
8708.94.75 |
| Hazardous Material Code |
N |
| Head Drive Type |
Hex |
| Heim Joint |
Teflon lined 5/8” heim joint, Teflon lined 5/8” heim joint |
| Housing Material |
6061 T-6 aluminum |
| Includes |
2x Tie Rods, 2x Tie Rods |
| Inner Sleeve Thread Size |
M14x1.5 RH Thread, M14x1.5 RH Thread |
| Life Cycle Status Code |
Available to Order |
| Locking Nut Included |
Yes |
| Manufacturer Restriction |
None |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
A |
| Outer Sleeve Thread Size |
5/8"x18 RH Thread, 5/8"x18 RH Thread |
| part type |
Steering Tie Rod End |
| Pre-Greased |
Yes |
| Product Line |
Steering Tie Rod End, Steering Tie Rod End |
| Product Type |
Bump Steer Kit, Bump Steer Kit |
| Quantity |
1, 1 |
| Reinforced |
Yes |
| SDR Required Flag |
N |
| Sleeve Length |
4, 4 |
| Steering Type |
Manual |
| Sub Category |
Steering, Gear and Related Components |
| Thread Direction |
Right Hand Thread, Right Hand Thread |
| Tie Rod Material |
6061 T-6 aluminum |
| Tube Diameter |
5/8", 5/8" |
| Type |
Straight |
| Universal Or Specific Fit |
Specific Fit, Specific Fit |
| Warning |
California Proposition 65 |
| Warranty Time |
1 |
| Washer Included |
Yes, Yes |
| Weight |
5, 5 |
| GTIN |
00844165002413 |
