60mm Front Right Corner Module
Bilstein B8 8112 (ZoneControl CR) is a direct fit, 2.65-in body position sensitive coilover shock designed for light trucks and SUV’s. ZoneControl CR is a revolutionary technology delivering position sensitive damping. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0-3.8” (depending on application). The coilover is supplied with a remote reservoir for increased cooling and an accompanied, bolt-on anodized reservoir chassis mount. BILSTEIN B8 8112 (ZoneControl) CR position sensitive coilovers will offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs.
  • ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons
  • Triple piston design delivers comfort during every day driving conditions and maximum control under large suspension inputs
  • 60mm remote reservoir for increased oil capacity and cooling

Application Summary:

Year Make/Model
2003-2009 Lexus GX470
2003-2009 Toyota 4Runner
2007-2009 Toyota FJ Cruiser
Attributes
Adjustable Damping Non-Adjustable
Body Design Smooth Body (Coilover)
Body Diameter (ID) 60mm
Body Diameter (OD) 2.65 in.
Body Material Steel
Boot Included No
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Collapsed Length (IN) 17.99
Collapsed Length (mm) 456.9
Country of Origin (Primary) US
Dampening Type Oil
Emission Code Legal US
Extended Length (IN) 22.80
Extended Length (mm) 579.1
FAB ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons, Triple piston design delivers comfort during every day driving conditions and maximum control under large suspension inputs
Finish Dampers: EVO Grey / Springs: Black
Front Main Spring Rate (lbs/in) 600 lbs
Grade Type Performance
Harmonized Tariff Code (Schedule B) 8708800050
Hazardous Material Code N
Internal Design Monotube
Life Cycle Status Code Available to Order
Lower Mount Type Eye 14.1mm
Optional Heavy Load Springs 53-291387, 53-332837
PartType Shocks / Struts
Piston Diameter 60mm
Reservoir Yes
SDR Required Flag Y
SDS Sheet Number USA SDS_Shock_Air Spring_V2_EN.pdf
Segment Light Truck
Series B8 8112 (ZoneControl CR)
Shaft Diameter (mm) 22.0
Spring Seat Included Yes
Upper Mount Type Special
Warranty Time 24
GTIN 00651860916767

Write a review.

Note: HTML is not translated.
    Bad           Good