Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 7.800" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.
The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the pa parts in the valve train, as well as the rpm at which the engine will be run. Today's all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Tech pushrods fill that requirement. Hi-Techâ„¢ pushrods feature a one-piece design from .080" wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black-oxide finished with length and part number laser etched on the OD for ease of identification.
Information:
Available individually under 7972-1
Application Summary:
| Year |
Make/Model |
| 1987-1994 |
Chevrolet Blazer |
| 1988-1995 |
Chevrolet C1500 |
| 1992-1995 |
Chevrolet C1500 Suburban |
| 1988-1995 |
Chevrolet C2500 |
| 1992-1995 |
Chevrolet C2500 Suburban |
| 1988-1995 |
Chevrolet C3500 |
| 1987-1992 |
Chevrolet Camaro |
| 1987-1993 |
Chevrolet Caprice |
| 1987-1991 |
Chevrolet Corvette |
| 1987 |
Chevrolet El Camino |
| 1987-1995 |
Chevrolet G10 |
| 1987-1995 |
Chevrolet G20 |
| 1987-1996 |
Chevrolet G30 |
| 1988-1995 |
Chevrolet K1500 |
| 1992-1995 |
Chevrolet K1500 Suburban |
| 1988-1995 |
Chevrolet K2500 |
| 1992-1995 |
Chevrolet K2500 Suburban |
| 1988-1995 |
Chevrolet K3500 |
| 1987-1988 |
Chevrolet Monte Carlo |
| 1987 |
Chevrolet R10 |
| 1987-1988 |
Chevrolet R10 Suburban |
| 1989-1991 |
Chevrolet R1500 Suburban |
| 1987-1988 |
Chevrolet R20 |
| 1987-1988 |
Chevrolet R20 Suburban |
| 1989-1991 |
Chevrolet R2500 Suburban |
| 1987-1988 |
Chevrolet R30 |
| 1989-1991 |
Chevrolet R3500 |
| 1995 |
Chevrolet Tahoe |
| 1987 |
Chevrolet V10 |
| 1987-1988 |
Chevrolet V10 Suburban |
| 1989-1991 |
Chevrolet V1500 Suburban |
| 1987 |
Chevrolet V20 |
| 1987-1988 |
Chevrolet V20 Suburban |
| 1989-1991 |
Chevrolet V2500 Suburban |
| 1987-1988 |
Chevrolet V30 |
| 1989-1991 |
Chevrolet V3500 |
| 1987 |
Pontiac Firebird |
| Attributes |
| Amazon ASIN |
B000CESFVA |
| ASIN |
B000CESFVA |
| C.A.R.B. E.O. Number |
N/A |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967? |
Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles? |
Yes |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles? |
Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exemption Reason |
No impact on pollution output of vehicle. |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Diameter |
5/16, 5/16 |
| Diameter (in.) |
5/16 |
| Emission Code |
Legal US |
| Engine Make/Size |
Chevy Small Block (262-400) |
| Guide Plate Compatible |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8409914000 |
| Hazardous Material Code |
N |
| Length |
7.8, 7.8 |
| Life Cycle Status Code |
Available to Order |
| Lifter End Style |
5/16 Oil Through One-Piece Construction Ball, 5/16 Oil Through One-Piece Construction Ball |
| NAFTA Preference Criterion Code |
B |
| Overall Length (in.) |
7.8 |
| Pushrod Series |
Hi-Tech, Hi-Tech |
| Rocker End Style |
5/16 Oil Through One-Piece Construction Ball, 5/16 Oil Through One-Piece Construction Ball |
| SDR Required Flag |
N |
| SDS Sheet Number |
N/A |
| Wall Thickness |
0.08, 0.08 |
| Warranty Time |
12 |
| GTIN |
00036584420613 |
