650 CFM - 4150 - Mechanical Secondaries - Shiny - Gasoline
Holley is proud to introduce the all new aluminum Track Warrior carburetors. They utilize the best features from Holley's Race Bred Classic 4150 HP™ carbs, and we have added billet metering blocks, billet base plate, and knurled (hand adjustable) curb idle screws. The Track Warrior features an aluminum contoured main body design and has screw in air bleeds for precision tuning capabilities. The all new aluminum Track Warrior weighs up to 40% less and adds horsepower and torque, pushing on the track performance to the next level!!
Holley is proud to introduce the all new aluminum Track Warrior carburetors. They utilize the best features from Holley's Race Bred Classic 4150 HP™ carbs, and we have added billet metering blocks, billet base plate, and knurled (hand adjustable) curb idle screws. The Track Warrior features an aluminum contoured main body design and has screw in air bleeds for precision tuning capabilities. The all new aluminum Track Warrior weighs up to 40% less and adds horsepower and torque, pushing on the track performance to the next level!!
- Aluminum construction for weight savings and long lasting good looks in purple or black
- Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
- Optimized race calibrations for outstanding throttle response
- Contoured venturi inlet offers balanced airflow for increased horsepower
- Screw in air bleeds for precision tuning capabilities
- Four corner idle for precise idle control
- Mechanical secondaries for awesome tire turning performance
- The billet metering blocks feature improved durability over cast blocks, true gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictors & idle feed restrictors)
- Available in 650, 750, and 850 CFM versions
Information:
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.Application Summary:
| Year | Make/Model |
|---|---|
| 1962-1973 | AC Shelby Cobra |
| 1952-1954 | Allard J2X |
| 1954 | Allard K3 |
| 1952-1954 | Allard Monte Carlo |
| 1952-1954 | Allard Safari |
| 1960-1974 | American Motors Ambassador |
| 1966-1968 | American Motors American |
| 1968-1970 | American Motors AMX |
| 1961-1962 | American Motors Classic |
| 1965-1966 | American Motors Classic |
| 1971-1974 | American Motors Hornet |
| 1968-1974 | American Motors Javelin |
| 1965-1967 | American Motors Marlin |
| 1971-1976 | American Motors Matador |
| 1969 | American Motors Rambler |
| 1961 | American Motors Rebel |
| 1967-1968 | American Motors Rebel |
| 1970 | American Motors Rebel |
| 1966 | American Motors Rogue |
| 1962-1965 | Apollo GT |
| 1965-1985 | Avanti II |
| 1987-1991 | Avanti II |
| 1992-1995 | Bentley Continental |
| 1965-1969 | Bizzarrini GT America |
| 1974 | Bricklin SV-1 |
| 1961-1963 | Bristol 407 |
| 1963-1965 | Bristol 408 |
| 1965-1967 | Bristol 409 |
| 1967-1969 | Bristol 410 |
| 1969-1974 | Bristol 411 |
| 1973-1975 | Buick Apollo |
| 1971-1973 | Buick Centurion |
| 1954-1958 | Buick Century |
| 1973-1981 | Buick Century |
| 1959-1989 | Buick Electra |
| 1959-1964 | Buick Estate Wagon |
| 1970-1983 | Buick Estate Wagon |
| 1967 | Buick Gran Sport |
| 1970-1972 | Buick GS |
| 1968-1969 | Buick GS 350 |
| 1968-1969 | Buick GS 400 |
| 1970-1972 | Buick GS 455 |
| 1959-1963 | Buick Invicta |
| 1959-1990 | Buick LeSabre |
| 1958 | Buick Limited |
| 1973-1987 | Buick Regal |
| 1963-1985 | Buick Riviera |
| 1952-1958 | Buick Roadmaster |
| 1954 | Buick Skylark |
| 1961-1972 | Buick Skylark |
| 1975-1979 | Buick Skylark |
| 1961-1969 | Buick Special |
| 1964-1972 | Buick Sportwagon |
| 1955-1958 | Buick Super |
| 1962-1970 | Buick Wildcat |
| 1987-1990 | Cadillac Brougham |
| 1965-1976 | Cadillac Calais |
| 1952-1984 | Cadillac Commercial Chassis |
| 1953-1982 | Cadillac DeVille |
| 1953-1978 | Cadillac Eldorado |
| 1981-1982 | Cadillac Eldorado |
| 1965-1982 | Cadillac Fleetwood |
| 1986 | Cadillac Fleetwood |
| 1952-1964 | Cadillac Series 60 Fleetwood |
| 1952-1964 | Cadillac Series 62 |
| 1958 | Cadillac Series 70 Fleetwood Eldorado |
| 1952-1964 | Cadillac Series 75 Fleetwood |
| 1981-1982 | Cadillac Seville |
| 1966-1974 | Checker Aerobus |
| 1969-1970 | Checker Deluxe |
| 1965-1974 | Checker Marathon |
| 1977-1979 | Checker Marathon |
| Attributes | |
| ASIN | B01I6XDJEG |
| Barrel | Four |
| Barrel Quantity | 4 |
| Barrels | 4, 4 |
| Billet Color | Black, Black |
| Body Color | Polished Aluminum |
| Body Finish | Polished |
| Body Material | Aluminum |
| Booster | Down Leg, Downleg |
| Booster Type | Down Leg |
| Brand | Holley, Holley |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Carburetor Material | Aluminum, Aluminum |
| Carburetor Type | 4150 |
| Carburetor Use | Performance and Race, Performance and Race |
| Category | Air and Fuel Delivery, Air and Fuel Delivery |
| CFM | 650, 650 |
| CFM Rating | 650 |
| Choke | None, None |
| Choke Type | None, None |
| Color | Polished/Black |
| Condition | New, New |
| Country of Origin (Primary) | US |
| Cubic Feet Per Minute Rating | 650, 650 |
| Emission | Without EGR |
| Emission Code | 3, 3, Off Road |
| Finish | Shiny, Shiny |
| Flange | Square Bore |
| Flange Shape | Square |
| Flange Type | Square/4150, Square/4150 |
| Fuel | Gasoline, Gasoline |
| Fuel Inlet | Dual, Dual |
| Fuel Type | Gasoline, Gasoline |
| Grade Type | Performance, Performance |
| Harmonized Tariff Code (Schedule B) | 8409915085 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Linkage Attached | Yes, Yes |
| Marine Approved | No, No |
| Marine Use | No, No |
| Material | Aluminum, Aluminum |
| Model | 4150, 4150 |
| Mounting Hole Quantity | 4, 4 |
| NAFTA Preference Criterion Code | B |
| part type | Carburetor, Carburetor |
| Primary Jet Diameter | 73, 73 |
| Primary Main Jet | 73, 73 |
| Primary Main Jet Size | 73, 73 |
| Primary Power Valve | 6.5, 6.5 |
| Primary Pump Nozzle Size | 31, 31 |
| Product Type | 4150 Model Carburetor, Carburetor |
| Sale Category | Carburetors and Components |
| SDR Required Flag | N |
| Secondaries | Mechanical, Mechanical |
| Secondary Main Jet | 80, 80 |
| Secondary Main Jet Size | 80, 80 |
| Secondary Pump Nozzle Size | 31, 31 |
| Secondary Type | Mechanical |
| Spacer Included | No, No |
| Sub Category | Carburetion, Carburetion |
| Supercharged Application | No, No |
| Supercharger Compatible | No, No |
| Throttle Bore | 1.688 in., 1.688 inch |
| Throttle Bore (in.) | 1.688 |
| Throttle Bore Diameter | 1.688 inch, 1.688 inch |
| Type | Automotive |
| Usage | Racing/Circle Track |
| Venturii Size | 1.250 in., 1.250 inch |
| Venturii Size (in.) | 1.250 |
| Warning | California Proposition 65, California Proposition 65 |
| Warranty | Limited 90 Day, Manufacturer's Limited 90 Day Warranty |
| GTIN | 00090127739259 |