Fits 2020 & Up Ford 7.3L Gasoline V8 Godzilla Engines with Holley Oil Pump and Pan
For certain applications, higher than normal oil pressure is required. Typically, the oil pan must be removed to change the pressure spring on an oil pump. The Holley oil system allows direct access to the spring through the access port on the bottom front of the pan. Holley high-pressure spring P/N 302-102 can be purchased and installed to increase oil pressure by approximately 10 PSI at higher RPMs. To change the spring, remove the port plug, spring, and plunger. In some cases, the plunger may stay in the port. Make sure when reassembling the plunger is on top of the spring and oriented correctly.
  • Increases oil pressure by approximately 10psi at higher RPM

Information:

Torque plug to 30 ft./lbs. (use blue thread locker).
Attributes
Brand Holley
Category Engine
Coil Quantity 9
Country of Origin (Primary) US
Emission Code 5, 5
Engine Ford 7.3L Godzilla, Ford 7.3L Godzilla
Grade Type Performance
Harmonized Tariff Code (Schedule B) 8409915085
Hazardous Material Code N
Life Cycle Status Code Available to Order
Material Steel, Steel
part type Engine Oil Pressure Relief Valve Spring
Product Type Oil Pressure Spring, Oil Pressure Spring
Push Or Pull Type Push
SDR Required Flag N
Sub Category Hardware, Fasteners and Fittings
Warning California Proposition 65, California Proposition 65
Warranty Limited 90 Day, Manufacturer's Limited 90 Day Warranty
GTIN 00090127140062

Write a review.

Note: HTML is not translated.
    Bad           Good