6'' MAX3.3 Suspension System 2019-2024 Ram 2500 W/ Falcon 3.3 Shocks And Radius Arms Standard Output Diesel Motor
Kit Features and Benefits:· 6” front lift with a coil spring rear lift for the perfect lifted stance.· Includes Driveline Indexing System with transfer case clocking ring and new heavy-duty transmission crossmember.· Tubular Radius Arms correct the caster angle included in kit· Maintains factory turning radius without rubbing when using the recommended wheel and tire size.· Maintains factory suspension geometry and articulation.· For use on the Ram 2500 HD Diesel engine trucks only (excludes gasoline-engine applications).· Allows for up to 37x12.50 tires on 9" wide wheels with +01 to +18 offset.· 3.3 Fast Adjust Dampers offer a wide range of adjustability for specific terrain and/or handling characteristics with two separate knobs to tune to your preference.· 3-Position Fast Adjust Knob for Soft, Custom, and Firm Compression. Soft mode allows a partial bypass of the main piston for a softer ride· 8-Position Micro Adjust Dial offers refined damping adjustments· Reservoir design increases nitrogen to oil ratio for consistent damping over wide temperature ranges.· Hard Anodized Large Bore 6061-T6 Aluminum Shock Body for impact and corrosion resistance as well as increased oil volume for consistent performance.· VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up for reduced body roll and an overall increase in damping to reduce bottom out when pushed to the limit.· Red Line high VI shock oil for consistent performance across all temperatures from -50F to 450F with anti-wear and lubricity agents.*Kits will not fit any models with HEMI Gasoline engines, dually models, Classic models, and any automatic-leveling rear air suspension models.
- 6” front lift with a coil spring rear lift for the perfect lifted stance.
- Includes Driveline Indexing System with transfer case clocking ring and new heavy-duty transmission crossmember.
- Tubular Radius Arms correct the caster angle included in kit
- Maintains factory turning radius without rubbing when using the recommended wheel and tire size.
- For use on the Ram 2500 HD Diesel engine trucks only (excludes gasoline-engine applications).
- Allows for up to 37x12.50 tires on 9" wide wheels with +01 to +18 offset.
- 3.3 Fast Adjust Dampers offer a wide range of adjustability for specific terrain and/or handling characteristics with two separate knobs to tune to your preference.
- *Kits will not fit any models with HEMI Gasoline engines, dually models, Classic models, and any automatic-leveling rear air suspension models.
- Special Note RAM TSB 03-003-23: Symptom/Vehicle Issue: Ratchet Type Click, Clicking Noise Heard In Four Wheel Drive (4WD) While Turning. Download TSB Info. Recommended driveline for the 68RFE Adams Drive Shaft SKU:ASDRAM-1350F-5GEN.
Application Summary:
| Year |
Make/Model |
| 2019-2024 |
Ram 2500 |
| Attributes |
| Bushings Included |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color |
Black, Black, Gray |
| Control Arm Material |
DOM tube steel, DOM tube steel |
| Country of Origin (Primary) |
US |
| Fitment |
Direct Fitment, Direct Fitment |
| Front Lift Component |
Coilover, Coilover |
| Front Lift Height |
6 Inches, 6 Inches |
| Front or Rear |
Front and Rear, Front and Rear |
| Front Shocks |
Falcon 3.3, Falcon 3.3 |
| Harmonized Tariff Code (Schedule B) |
8708801600 |
| Hazardous Material Code |
N |
| Install Difficulty |
Difficult Requires Professional Installation, Difficult Requires Professional Installation |
| Installation Time |
5+ Hours, 5+ Hours |
| Life Cycle Status Code |
Available to Order |
| Lift Kit Category |
Big Lift, Big Lift |
| Lift/Drop Height |
6 in. |
| Material |
Fabricated Steel, Fabricated Steel, Tube Steel |
| Max Tire Diameter Custom Fit |
37, 37 |
| Maximum Lift |
6, 6 |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Component |
Coil Spring, Coil Spring |
| Rear Shocks |
Falcon 3.3, Falcon 3.3 |
| SDR Required Flag |
N |
| Shocks Included |
Yes |
| Whats Included |
Radius Arms, Radius Arms |
| GTIN |
00194933361069 |